CompactPCI Prozessor-Blade – cPCI-6636 Serie

6U CompactPCI 6th/7th Gen Intel® Xeon® E3 and Core™ i3/i7 Processor Blade

6U CompactPCI Prozessor-Blade – cPCI-6636 Serie

Overview

ThecPCI-6636 Series is a 6U CompactPCI® processor blade based on the 6th/7th Generation Intel® Xeon® E3 and Intel® Core™ i3/i7 Processors with Intel® HM170 or CM236 Chipsets. The cPCI-6636 supports up to 16GB onboard DDR4-2133 memory and 16GB DDR4-2133 via SODIMM. Total memory capacity is up to 32GB of DDR4-2133. The cPCI-6636 is a highly integrated processor blade fit for mission critical applications in industries ranging from automation to defence.

The cPCI-6636 is positioned as the successor to ADLINK’s cPCI-6626 and cPCI-6525 in terms of I/O and feature set. The cPCI-6636 provides a 2.8x performance boost over the 2nd gen Core™ i7 (cPCI-6626) and 30% performance boost over 3rd gen Core™ i7 (cPCI-6525). Graphics features include 3 symmetric independent displays, 3D HW acceleration, DirectX 12, OpenGL 4.4, and H.265 HW decode/encode. The cPCI-6636 achieves 2.7x graphics score improvement over the 3rd gen Core™ i7 (cPCI-6525).

The cPCI-6636 Series supports flexible I/O interfaces. Faceplate I/O for the cPCI-6636 (4HP) includes 2x GbE supported by an Intel® i219LM PHY controller and Intel® i210IT Ethernet controller, 3x USB 3.0, 1x RJ-45 serial port, and 1x DVI-I. Onboard I/O includes one 2.5″ SATA drive space, one 7-pin SATA connector, and one CFast slot by adapter board. The cPCI-6636D (8HP) has identical I/O to the single-slot version, except that an XMC connector via PCIe x8 adapter board is supported in place of the CFast slot. A third configuration, the cPCI-6636DZ (8HP), supports 8x USB 3.0, 2x GbE, 6x serial TX/RX and 2x VGA on the faceplate, and the same onboard I/O as the cPCI-6636D.

Rear I/O signals are available on cPCI-6636 and cPCI-6636D which are equipped with CompactPCI J3 and J5 connectors. Available to the RTM are up to 2x GbE to J3 by Intel® I210IT Ethernet controllers for PICMG 2.16, and an additional 2x GbE switchable to rear from the front panel for a total of up to 4x Ethernet to rear J3 and J5. Also available are 1x VGA to J3, 1x TMDS to J5, 2x SATA 1.5 Gb/s to J3, 1x SATA 1.5 Gb/s to J5, 6x USB 2.0 to J3, 10x GPIO to J3 and J5, HDA and KB/MS to J3, and serial ports to J5. For PCIe expansion, the cPCI-6636 offers one PCIe x4 or 4x PCIe x1 to J5.

DATASHEET

Technical Specifications

  • Supports 6th/7th Gen Intel® Xeon® E3 and Intel® Core™ i3/i7 processor
  • Up to 32GB DDR4-2133 memory, soldered and SO-DIMM, optional ECC
  • XMC support
  • Up to 8x USB 3.0, 6x RS-232(TX/RX)
  • Up to 4x GbE to rear I/O
  • TPM2.0 and BIOS protection
  • SEMA 3.5 support

Get in touch




    Privacy policy

    We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

    Privacy Settings saved!
    Privacy Settings

    When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

    These cookies are necessary for the website to function and cannot be switched off in our systems.

    In order to use this website we use the following technically required cookies
    • wordpress_test_cookie
    • wordpress_logged_in_
    • wordpress_sec

    Decline all Services
    Accept all Services