Overview
The Ethernet Remote I/O Module is designed for laboratory and industrial applications and is used for test automation. The QUBI RIO-100 module carries 24 power relays (12A each) and allows easy and quick simulation of funtional and diagnosis tests, applied for example during development for control unit tests.
These concern controls units used in various sectors:
- Automotive industry
- Automation technology
- Construction machinery
- Motor and commercial vehicules
Wherever you use the QUBI-RIO device, the open programming interface ensures quick and easy integration in existing test automations: the device is charaterized by system openess and easy application.
Technical Specifications
- Relay specification:
- Relay: 24 relays
- Isolation relay: 1 kV
- Switching and feed-through voltage: max. 60 V DC
- Guaranteed switching cycles: max. 100.000 switching cycles
- Isolation resistance relay contacts: min. 1 M Ω
- Isolation relay contacts to control: min. 1,5 V AC
- QUBI-RIO 100 (Power Relays)
- Switching current, arrangement: 12 A, SPST-NO
- Switching and feed-through power (DC): max. 230 VA
- Switching speed incl. contact bounce: max. 1s
- Switching frequency: max. 2 Hz
- QUBI-RIO 110 (Signal Relays)
- Switching current, arrangement: 2 A, SPST-NO
- Switching and feed-through power (DC): max. 30 VA
- Switching speed incl. contact bounce: max. 8 ms
- Switching frequency: max. 100 Hz
- Interfaces:
- RJ45: 1x 10/100 Mbit (TCP/UDP)
- LEDs: USB, Fault, Status, Power
- DIP switches: Configuration, USB/Network, Standalone
- USB 2.0: Firmware update, communication, configuration
- I/O contacts: Spring terminal
- Configuration and programming:
- Configuration: Webinterface
- Programming API: C, C#, C++, Phyton, REST-Services, Java, .NET
- Protocols: TCP/IP, UDP, USB HID
- Electrical specification:
- Supply voltage (Upower): 12 V DC to 48 V DC
- Power consumption:
- Power Relays (QUBI-RIO 100): typ. 5,0W
- Signal Relays (QUBI-RIO 110): typ. 2,0W
- Connectors: 2-pole clamp removable
- Mechanical specification:
- Mounting: desktop, DIN rail
- Protection: IP20
- Dimension housing (H x W x D): 170 x 115 x 44 mm
- Weight: 750g
- Environment specification:
- Operating temperature: -40°C to +70°C regard derating
- Storage temperature: -40°C to +85°C
- Humidity non-condensing: 35% to 85%
Get in touch
Related Products
Rugged AP/Router/EZ MESH AP IWF 310
Industrial EZ Mesh Access Point Dual RF with 1x 802.11an+1x 802.11 b/g/n 2×2 MIMO
Fanless Industrial Security Appliance – ISA 140
Compact Security Appliance in a DIN Rail Form Factor with Intel Atom® Processor and 6x 1GbE RJ45 Ports
AI-enabled Embedded Platform- DLAP-301-JNX
AI-enabled Embedded NVR Powered by NVIDIA® Jetson Xavier™ NX
Rugged Communication Units and Router
Rugged portable and vehicle mounted nodes for tactical communication and vehicle mounted 19″ routers
Rugged Vehicle IoT Gateway
Low power IoT gateway computer designed for outdoor installation on vehicles operating in worldwide environmental conditions – compliance tested for global radio regulations.
1U 48 Port PoE 10-Gigabit-Ethernet Switch – PSNA 110
Ultra-low latency Ethernet Switch with 48x GbE PoE+, 4x 10GbE SFP+ and 2x QSFP
Router/Firewall/VPN – IFA 3610
CoreFort™ Industry Firewall, 5 ports VPN Router with Wide Temperature Range
Industrial IoT Serial-Fieldbus Device Server – NIO 50
Industrial Wi-Fi, Seriell/Ethernet Device Gateway
Industrial IoT Embedded System – MXE-200i
Extremely comact embedded system for the Internet of Things (IoT)
Processor-Based Embedded IoT Gateway Platform – MXE-200i
Matrix MXE-200i – Intelligent, robust and ultra-compact Embedded System for the Internet of things (IoT)
